Table Saw Fence
- Mobile base with 30' fence with Rout-R-Lift. ® and rail system for ripping 50' to right and 12' to left of saw blade. 2195042K Accu-Fence ® - fence assembly only, no rails - for Model 66. 2195079 Accu-Fence ® and rail system for Model 66 w/sliding table. Page 24: Parts List: Trunnion Assembly.
- 3.0 Safety warnings. Read and understand the entire owner's manual before attempting assembly or operation. Read and understand the warnings posted on.
- Lathe Duplicators. Home /; Lathe Duplicators; Home / Lathe Duplicators. Showing all 2 results.
- Fence or miter gauge to support the workpiece. Make sure that rip fence is parallel to blade. If not, the chances of kickback are very high.
COMPARE PERFORMANCE & PRICE WITH ANY FENCE!
Being able to cut materials safely and precisely on your table saw is essential for fast and accurate Woodworking. Unless saw fences are well designed they make cutting a chore instead of pleasure, resulting in poor quality and inaccu- rate cuts. Most Saw Fence Systems….
Welcome to Vega Welding & Fence Welcome to our site,as an small family business we believes in hard work, quality workmanship, and being honest to customers and his workers equally. Our company has been servicing companies and residents, supplying an entire line of fencing including cast iron, ornamental, wrought iron, aluminum, chain link,.
- Do not lock parallel to saw blade.
- Do not have accurate measuring scales.
- Have Fence Bars that are too short.
- Do not have adequate width ripping capacity.
- Require frequent re-alignment.
- Lack safety devices.
- Are unable to be finely adjusted.
The Vega Saw Fence Systems solve all of these problems (and more!) to assure Accurate and reliable cuts combined with smooth, precise motion.
Vega Fence Parts
| Specifications | |
|---|---|
| 10 inch Jobsite Saw PRO w/mobile cart and high/low fence system | |
| Motor Configuration: | 120 VAC 60 Hz, Universal |
| Amperage: | 15A |
| Cord Length: | 116 inch |
| Sold and Shipped as Full Set Only with Cart : | (no Cartless Option Available) |
| Motor Continuous HP: | 1.5 HP |
| Motor Peak HP: | 4 HP |
Saw Dimensions without Cart (Body only): | 31-3/4 W x 28-3/4 D x 15-1/2 H inch |
| Saw Dimensions with Open Cart (ready to use): | 48 W x 29 D x 36 H inch |
| Saw Dimensions with Closed Cart (on End/stored position): | 26-1/2 W x 29 D x 45 H inch |
| Table Dimensions (Retracted): | 31-1/4 W x 24-5/8 D inch |
| Table Dimensions (Extended): | 43-3/8 W x 24-5/8 D inch |
| Shipping Dimensions: | 32 W x 43 D x 26 H inch |
| Shipping Weight (with Cart): | 137 lbs |
| Weight (Saw Only): | 84 lbs |
| Weight (with Cart): | 113 lbs |
| Blade Diameter: | 10 inch |
| Dado Diameter: | 8 inch |
| Dado Max. Width: | 13/16 inch |
| Bevel Angle Range: | -1 to 46 |
| Max. Depth of Cut, Blade at 0 deg: | 3-1/8 inch |
| Max. Depth of Cut, Blade at 45 deg: | 2-1/8 inch |
| Max. Rip Right of Blade (Extended): | 25-1/2 inch |
| Max. Rip Left of Blade: | 9-3/4 inch |
| Left | |
| Arbor Diameter at Blade: | 5/8 inch |
| Table in Front of Blade (Max Elev): | 7-7/8 inch |
| Table Behind Blade (Max Elev): | 7-3/8 inch |
| Miter Slots T-shaped Dimensions: | 0.754 W x .413 D; T .956 W x .157 THK inch |
| Main Bearing Size: | 62mm OD x 30mm ID x 16mm W |
| Second Bearing Size: | 52mm OD x 25mm ID x 15mm W |
Riving Knife/Splitter Thickness: | 2.3mm (.090 inch) |
| Hand Wheel: | Effective diameter 6.3 inch |
| Belts: | Poly-V static dissipative belt |
| Table Flatness Measured Diagonally: | 0.033 inch Inches |
| Dust Collection Port Diameter: | 2-9/16 inch Outside, 2-1/4 inch Inside |
| Active Dust Collection Blade Guard: | polycarbonate, extends 1 inch right of blade |
| Blade Guard (Dust Collection) Port Diameter: | 1-11/16 inch Outside, 1-3/8 inch Inside |
